Brembo master cylinder overhaul kit / rebuild kit for overhauling foot operated PS11B and PS11C master cylinders. Includes all seals and brake grease. Can also be used to repair handlebar master cylinders 10477610 and 10477650

This seal kit replaces Guzzi part numbers 66139790

 1 in stock

 10436241 GU10436241 10 43 62 41
 1043 6241 1043.6241 10.43.62.41

Also fits Ducati Monster S2R, Ducati 748 SP, Biposto, Ducati 750 SS (1992), Ducati 750 SS (1994), Ducati 888 (1993-), Ducati 900 SS (1992), Ducati 900 SS/SL (1994-1997), Ducati 916 (1994), Ducati 916 Monop.-Senna (1995-), Ducati 916 SP (1996), Ducati Monster 900 (1993), Ducati Monster 900 (1994), Ghezzi Brian Supertwin,

Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 39659000 GU39659000 39 65 90 00
 3965 9000 3965.9000 39.65.90.00

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Cagiva Elefant E750, Ducati 748

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Set of 3 piston rings

 Sorry, this part is no longer available.

27060220-z 27060220 GU27060220 27 06 02 20
 2706 0220 2706.0220 27.06.02.20

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 4 in stock

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

Pair of replacement anodised alloy pistons for Brembo F05 (P5) calipers. These also fit Grimeca calipers with 32mm pistons

Also used on some Laverdas. BRA19301 for alternative part in stainless steel

 2 in stock

 19652300 GU19652300 19 65 23 00
 1965 2300 1965.2300 19.65.23.00

Also fits Benelli 250 TS, Ducati Pantah 500SL

Rebuild kit for Brembo Radial Calipers with 34mm pistons fitted to the front of these models. Contains seals, brake grease, washers, bleed screw and dust cap. One kit required per caliper.

Caliper seal kit

 This part is available by special order, request a quote

Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

 2 in stock

Piston ring set

4 ring set

 Sorry, this part is no longer available.

13060700-z 13060700 GU13060700 13 06 07 00
 1306 0700 1306.0700 13.06.07.00